Pressure-sensitive adhesive for double-sided tape of LED light strips

LED strip double-sided pressure-sensitive adhesive tape, high temperature resistant, anti-lifting, does not lift under high temperature and high humidity conditions of 85°C and 85% humidity for 1000 hours, suitable for high-power, high-heat LED strips, ensuring long-term non-lifting. Peel strength 25N/inch, holding power at 80°C >1 week, good initial tack for easy application.

Solvent-based acrylic pressure-sensitive adhesive can replace 3M UV-cured products such as 3M467mp, 468, 3M7945, 3M9495MP.

High temperature and high holding power, can replace 3M467mp, 468, 3M7945, 3M9495MP, and various high-temperature resistant double-sided tapes, with good peel strength on PC, ABS, and steel plates.

Holds 1kg weight at 177°C for over one week without displacement.

High adhesion and high holding power, PP board peel strength 33N, holding power at 70°C over one week.
Suitable for special foam tapes, PET tapes, tissue tapes, double-sided tapes, etc.

High temperature resistant, no residue or bubbling after cold and hot tear at 300°C for 20 minutes, no residue or bubbling at 260°C for 30 minutes.
Suitable for high-temperature special tapes, PI tapes, conductive tapes, lithium battery tapes, PET tapes, etc., and high-temperature protective films.
No residue or yellowing after soldering.